Stay Outstanding

Home > Service>FAQ >


I. How to read 12 digits code with MINI900 device? 

 

There are two types of models need MINI900 device for 12 digits code reading : 

a. the model with card slot;   b. the model with one-key start.


1. Specific method for 12 digits code reading of the model with card slot(shown as Figure I): 

remove the card slot shell first (shown as Figure II). MINI900 cannot receive the vehicle signal directly for the limitation of card slot design, therefore it is necessary to remove the card slot to proceed. If the first time failed, please repeat for several times.


1.png

(Figure I)


2.png

(Figure II)



2. Specific method for 12 digits code reading of the model with one-key start: 

directly read the 12 digits code with the MINI900 device put close to the start button. Shown as below. 


3.png



Note:When reading 12 digits code of the smart card, pls remove the battery and then operate as above.

After 12 digits code reading is successful, its display sequence is as follow: the last two digits in the second row + all digits in the first row, 

that is ED F8 98 6F 38 83. Shown as below.


图片1_副本.png



II. Procedures for Security Code Reading via OBDSTAR Key Master DP are as follow:


1. Select vehicle model and the latest software version 


图片2_副本.png


2. Select “Read PinCode” option 


图片3_副本.png


3. Select “Read PinCode(46 Smart Card)”


图片4_副本.png

  

4. Input the 12 digits code acquired by MINI900


图片5_副本.png


5. Make sure the input value is correct


图片6_副本.png


6. Read the security code successfully 


图片7_副本.png




About Us | News | Products | Service | Video | Carlist | Contact |

Address of Shenzhen:Floor 4, West Block, No.8 Building, Xinwu Industrial Zone, Taoyuan Street, Nanshan District, Shenzhen, 518055 China

+ Follow us